Toolbar     : More Options 
     Menu        : GeoTools -> More Options -> Workspace Setup 
CmdLine   : GT_WORKSPACESETUP

 
The GT_WORKSPACESETUP command is used to set the default workspace when GeoTools initializes.

Many users prefer to use the 'AutoCAD Classic' or 'Map Classic' workspace in which the pull-down menu bar is visible and the UI is primarily pull-down menus, toolbars and command pallettes. The other workspaces make use of the ribbon zed interface and do not offer pull-down menus by default.

The GT_WORKSPACESETUP command works in AutoCAD 2008 and above and allows you to set your user environment upon starting GeoTools.

 

 

Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Load GeoTools 
CmdLine   : GT_LOAD

If GeoTools has not been automatically loaded during startup, use this command to load GeoTools in your current drawing.


Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Unload GeoTools 
CmdLine   : GT_UNLOAD


Unload GeoTools from memory.

 Toolbar     : More Options 
      Menu       : GeoTools -> More Options -> Reset command defaults in registry 
CmdLine   : GT_REGRESET

The GT_REGRESET command is used to reset or clear the registry entry (default value) that is made for each GeoTools command


Tech Info: All GeoTools operating defaults are stored in HKEY_LOCAL_MACHINE\Software\Four Dimension Technologies\GeoTools


Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Search GeoTools / CADPower Commands 
CmdLine   : GT_CMDSEARCH

The GT_CMDSEARCH allows a complete search of all GeoTools and CADPower command names and descriptions. You can use this command to search for a string that occurs in either the command name or description. For example, if you want to know about all commands concerning polyline vertices, you may type "vertex" as the search string and search through all the commands in GeoTools and/or CADPower. Whether you are an evaluation user of existing user, this is a useful tool to check which of the tools exist in GeoTools or CADPower as well as the location and names of such tools.


Watch:



Toolbar      : More Options
     Menu         : GeoTools -> More Options -> List GeoTools/CADPower commands 
CmdLine   : GT_CMDLIST

The GT_CMDLIST command displays a category-wise lists of all commands in GeoTools and CADPower. It also produces a common list of commands which are present in both GeoTools and CADPower.



Toolbar     : More Options
     Menu        : GeoTools -> More Options -> About GeoTools 
CmdLine   : GT_ABOUT

Displays information about the GeoTools software.

Toolbar      : More Options
     Menu         : GeoTools -> More Options -> Readme and Installation 
CmdLine   : GT_README


Toolbar      : More Options
     Menu         : GeoTools -> More Options -> License Info
CmdLine   : GT_DISPLAYLICENSEINFO


Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Check Updates 
CmdLine   : GT_CHECKUPDATES

 The GT_CHECKUPDATES command checks our web-site for newer versions of GeoTools that may be available.


Toolbar      : More Options
     Menu         : GeoTools -> More Options -> Activate GeoTools License
CmdLine   : GT_ACTIVATELICENSE


Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Debug Info 
CmdLine   : GT_DEBUGINFO

The GT_DEBUGINFO command lists some key license info that is essential in the running of GeoTools software. It lists the computer appkeys, license file location and appkeys from the license file, validity etc.



Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Information about purchasing GeoTools
CmdLine   : GT_ORDER


The GT_ORDER command displays the GeoTools ordering and purchase information.



Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Watch GeoTools tutorial videos
CmdLine   : GT_VIDEOS


The GT_VIDEOS command displays all the current youtube videos available for GeoTools commands. You can select the video from the link and it will open youtube and play the video. An internet connection is required for this command to function.


Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Help 
CmdLine   : GT_GTHELP


Displays GeoTools help.


Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Specific Command Help 
CmdLine   : GT_CMDHELP

 
The command GT_CMDHELP displays online help for the specified GeoTools command. Basically GeoTools & CADPower are companion products that work in concert. If you enter the name of a command in one product and if it does not exist, it is searched for in the other product and displayed if it exists there. This ensures that the user can locate the command in either software and get help from one single place.

Note: Internet connection is required for GT_CMDHELP command


Toolbar     : More Options
     Menu        : GeoTools -> More Options -> Tutorials
CmdLine   : GT_TUTORIAL


Toolbar     : More Options (Other functions)
     Menu        : GeoTools -> More Options -> Display Application Key
CmdLine   : GT_APPKEY


The GT_APPKEY command displays the GeoTools application key for computer.